The problem of selecting the optimal pressure at an oil and gas field using the Katz method

View at publisher Summarise with VIRAT
Authors: Sergey N. Glukhov
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Increasing separation efficiency is a critical issue requiring the appropriate number of stages and separation pressure at wellbore collection and processing facilities. Optimizing unit parameters is a pressing issue, as it allows for a significant increase in oil yield by several percent, which, in today’s environment, significantly increases company profits and optimizes the cost of producing one ton of oil. This research focuses on the collection and processing of wellbore products. Primary oil processing occurs in preliminary water separation and treatment units. In this unit, the oil-water emulsion passes through separators, where associated petroleum gas is released by reducing pressure. Associated petroleum gas can be used for various purposes: injection into the reservoir to maintain reservoir pressure; generation of heat and electricity for internal needs; and shipment to gas processing plants. Secondary oil processing occurs in integrated oil treatment units, where the oil-water emulsion is separated from water, salts, and impurities. Water separation occurs in special devices called settling tanks, where water and oil are separated by density differences. This paper addresses the problem of selecting the optimal pressure for an oil and gas field using the Katz method. The field under study is characterized by low-viscosity gas-saturated oil, requiring multiple separation stages to most effectively remove associated petroleum gas. The calculations were performed in Excel using tables and the ”Solver“ function to find the parameters of the liquid and gas phases. Graphs were constructed for oil yield versus pressure in a two-stage separation system and for oil yield versus pressure in a three-stage separation system. Based on the results obtained, it can be concluded that a three-stage separation system, rather than a two- or six-stage system, would be more appropriate for this field.

Fields of Study & Subjects

Oil and Gas Production Techniques Offshore Engineering and Technologies Petroleum Processing and Analysis

Publication details

Journal / source
Multiphase Systems
Volume
21
Issue
1
Pages
18–24
Publication date
31 March 2026
Language
EN