Crushed Burnt Clay Bricks as Partial Replacement of Sand in Portland Cement Concrete – A Sustainable Construction Approach

Read full text Summarise with VIRAT
Authors: Getachew Mitiku Ashebir
Cited by: 0
References: 14

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract: The rapid pace of urbanization and infrastructure expansion has triggered a notable escalation in the generation of Construction and Demolition (C&D) waste. This investigation seeks to assess the performance of recycled fine aggregates from Crushed Burnt Clay Brick (CBCB) as a viable sustainable partial substitute for sand in the production of Portland cement concrete. Waste clay bricks were obtained from a land fill near Johannesburg, South Africa and were crushed. The fine particles that pass sieve 5 mm was utilized in this study. Concrete mixes with water- to- cement ratio of 0.55 was created to the control, and with an increase in percentage of CBCB were adjusted to 0.61, 0.66, 0.71, and 0.77. CBCB content of 0, 25, 50, 75, and 100% by mass was used to replace the crusher sand in the mixes. Standard tests were conducted to evaluate the workability, cube compressive strength, tensile strength, and drying shrinkage. While the samples for tensile strength were tested only after 28 days of a standard water curing, the samples for compressive strength were cured for 3, 7, and 28 days before testing. The results showed that up to 75% crusher sand substitution is possible for both tensile and compressive strengths. Also, an increase in CBCB content led to greater shrinkage. Consequently, incorporation of CBCB fines to replace natural sand in Portland cement concrete is viable. Such use can mitigate environmental impacts associated with sand mining and waste burnt clay bricks disposal.

Fields of Study & Subjects

Recycled Aggregate Concrete Performance Materials Engineering and Processing Concrete and Cement Materials Research

Publication details

Journal / source
Materials research proceedings
Volume
63
Pages
195–202
Publication date
1 January 2026
Language
EN