Mechanical Behavior of Low-Carbon Concrete Produced with Wood Ash as a Sustainable Cement Replacement

View at publisher Summarise with VIRAT
Authors: Uche Emmanuel Edike
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract. This study examines the mechanical behavior of low-carbon concrete produced using a binder blend of cement and wood ash (WAS) to promote the application of supplementary cementitious materials (SCMs) and enhance environmental sustainability. WAS blended concrete was produced by replacing ordinary Portland cement OPC) at varying percentages, 0%, 5%, 10%, 15%, 20%, and 25% of WAS. Some of the index properties of the materials and the mechanical behavior of the WAS-blended concrete were tested to evaluate the performance of the concrete. The particle size distribution curve of the natural sand employed in the study indicated a well-graded but predominantly uniformly distributed fine particles with a low Uniformity Coefficient of 1.37 and a Coefficient of Curvature of 1.04. The fineness analysis revealed that the OPC exhibited a residue of 3.13%, while the WAS recorded a slightly higher value of 3.83%. The study reveals that the initial setting time of WAS-OPC paste steadily increased with the WAS content, while workability declined at higher OPC replacement levels. The optimum mix of 15% wood ash blended concrete achieved 18.0% and 35.9% increase in compressive and flexural strengths at 28 days, respectively. The study suggests that wood ash is a promising SCM when used at controlled dosages between 5% and 15%, promoting the environmental sustainability of the construction industry.

Fields of Study & Subjects

Concrete and Cement Materials Research Materials Engineering and Processing Innovative concrete reinforcement materials

Publication details

Journal / source
Materials research proceedings
Volume
63
Pages
211–218
Publication date
1 January 2026
Language
EN