Optimizing the Performance of Water-processed LiNi 0.6 Mn 0.2 Co 0.2 O 2 Battery Half Cells by Blending Pluronic and Polyethylene oxide

Read full text Summarise with VIRAT
Authors: Chirag Patel, William Poizer, Ayo Omole, Laurence A. Middlemiss, Heather Grievson, Abarasi Hart, Samuel Guy Booth, Gabriel E. Pérez, Alan D. F. Dunbar, Igor Efimov, Kyra Sedransk Campbell, Serena A. Cussen
+3 more Louis F. J. Piper, Denis Cumming, Alisyn J. Nedoma
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Water-based cathode slurries for lithium-ion batteries can replace polyfluoroalkyl binders (PFAS) with biodegradable alternatives. Dispersing carbon black in water is the main formulation challenge. For the first time, an amphiphilic block copolymer, Pluronic F68, is blended with a water-soluble homopolymer, polyethylene oxide, to simultaneously disperse carbon black in water while controlling the viscosity of the slurry. Two series of binder blends are prepared: one systematically varies the viscosity of the binder solution, and the other systematically varies the solid loading of the slurry. These orthogonal series demonstrate that the polymer surfactant has a strong effect on half-cell performance independent of the role of viscosity. At the optimum formulation, water-processed half-cells using LiNi 0.6 Mn 0.2 Co 0.2 O 2 achieve a first specific discharge capacity up to 166 mAh g –1 and capacity retention of 89% after 100 cycles at 1C, comparable to cells made using a PFAS binder. Water-processed cells outperform the conventional cell at a fast charging rate of 5C. The results suggest that the affinity of the polymer binder(s) to carbon black, measured via adsorption, can be used as a selection criterion to identify binders that optimize the electrochemical performance of water-processed battery cells.

Fields of Study & Subjects

Advancements in Battery Materials Advanced Battery Materials and Technologies Battery Modeling and Management

Publication details

Publication date
27 March 2026
Language
EN
Document type
Preprint