Determination of Heat Treatment Parameters of Gypsum Molds in the Al/CF Composite Manufacturing Process
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
This paper presents a novel method for producing aluminium matrix composites reinforced with short carbon fibers. The composite casting process was preceded by studies on the determination of heat treatment parameters of gypsum molds. Taking into account the decomposition temperature of carbon fibers of 396˚C in an oxygen atmosphere, tests were carried out to verify the possibility of casting in a mold annealed at 380˚C. For this purpose, the moisture content of the gypsum mass was annealed at 730˚C and 380˚C was compared. The effect of a lower annealing temperature on the roughness of the aluminium matrix was also investigated, and a composite casting was made by saturating the CF preform with an aluminium alloy. The obtained castings were subjected to metallographic analysis. As a result of the conducted research, it was found that it is possible to obtain an Al/CF composite without the use of additional protective coatings and high saturation pressures, which increase production costs.
Fields of Study & Subjects
Aluminum Alloys Composites Properties
Aluminum Alloy Microstructure Properties
Cellular and Composite Structures
Publication details
- Journal / source
- Archives of Foundry Engineering
- Pages
- 139–146
- Publication date
- 30 March 2026
- Language
- PL