Gradient Path Functionally Graded Materials Fabricated by DMD using SS316L and IN625 Powders

Read full text Summarise with VIRAT
Authors: D. Dev Singh, Suresh Arjula, A. Raji Reddy, Ajay Kumar Revelly
Cited by: 0
References: 54

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Additive Manufacturing (AM) is a layer-by-layer material addition process. Direct Metal Deposition (DMD) is one of the metal powders feeding AM methods. It can produce Functionally Graded Material (FGM) used in extreme service conditions. Two gradient path FGM blocks were deposited by a continuous co-axial nozzle of a commercial DMD machine. Each deposited block was cut into ASTM E8 samples by a wire cut Electric Discharge Machine (EDM). The powders used for deposition were Stainless Steel 316L (SS316L) and Inconel 625 (IN625). The research paper is primarily focused on tensile properties of the samples. The first sample has higher Ultimate Tensile Strength (UTS) of 454 MPa as compared to the second sample and also has higher micro-hardness of 263 HV on its top surface. These properties are due to presence of cellular grains micro-structures in the sample. Fractography revealed that the samples are ductile. However, rounded indications and Face-Centered-Cubic (F.C.C) structure of the specimens have confirmed by radiography test and X-Ray Diffraction (XRD).

Fields of Study & Subjects

Additive Manufacturing Materials and Processes Powder Metallurgy Techniques and Materials Additive Manufacturing and 3D Printing Technologies

Publication details

Journal / source
Archives of Metallurgy and Materials
Pages
107–116
Publication date
22 March 2026
Language
PL