Recovery of Yttrium from Strong Acidic Sulphate Leach Solutions of Phosphate Rock Resources Using a Novel Acidic Phosphorus Extractant

Read full text Summarise with VIRAT
Authors: Ruixiang Wang, Bohan Wei, Qing Chen, Kuifang Zhang
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

A novel acidic phosphorus extractant (NAPE) was utilized to directly extract yttrium from highly acidic sulfate leach solutions derived from phosphate rock resources. The results indicated that the application acidity of NAPE exceeded those of the commonly used phosphate esters (P204, P507 and Cyanex272), and could directly extract yttrium from the strong acidic sulphate leach solutions (pH = 0.33). In batch experiments, 100% of yttrium was extracted from sulfuric solutions with a pH of 0.33 containing 0.203 g/L of yttrium, using a five-stage counter-current extraction process. The organic system consisted of 10% (v/v) NAPE and 5% (v/v) TBP in sulfonated kerosene, with an A/O ratio of 2:1, conducted at a laboratory temperature of 27±1°C over 10 minutes. Additionally, the extraction of other metals (aluminum, magnesium, manganese, and calcium) was minimal, with the exception of iron. Subsequently, 97.7% of the yttrium in the loaded organic phase was selectively stripped using a 1 mol/L H2SO4 solution, followed by a 1 mol/L H2C2O4 solution to strip the co-extracted iron for recycling purposes. Throughout the entire process, 97.7% of yttrium was recovered and concentrated in the strip liquor to a concentration of 1.5863 g/L. The yttrium in the strip liquor was easily recovered through sodium oxalate precipitation. After roasting, a yttrium oxide product was obtained with impurity elements such as Fe, Al, Mn, Mg, Ca, and P content less than 0.02%.

Fields of Study & Subjects

Extraction and Separation Processes Radioactive element chemistry and processing Chemical and Physical Properties in Aqueous Solutions

Publication details

Journal / source
Archives of Metallurgy and Materials
Pages
213–223
Publication date
22 March 2026
Language
PL