Studies on the Pore Structure and CO2 Adsorption Performance of Different Rank Coals
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
The study focuses on the analysis of pore structure and the determination of CO2 adsorption properties of different rank coals originating from the Upper Silesian Coal Basin. Measurements were performed using a low-pressure volumetric apparatus ASAP 2020, Micromeritics, for sample porosity characterisation, and a gravimetric analyser IGA-001, Hiden Isochema, for gas adsorption measurements in the range of elevated adsorbate pressures. CO2 adsorption isotherms were determined in the CO2 pressure and temperature, 0-100 kPa at 0°C and 0-1200 kPa at 30°C, respectively. Coal investigations were complemented by microscopic, technical and densimetric analyses. CO2 adsorption studies showed the absence of a universal model that adequately describes both low-pressure and elevated-pressure processes. Adoption of the Langmuir-Freundlich model proved appropriate for most coals (5 of 6), while for one sample (CR2), a better fit was obtained with the Freundlich model. The analyses confirmed differences in the pore structure and CO₂ adsorption properties of coals with different rank. With increasing degree of coalification, an increase in specific surface area and micropore volume was observed. All coals exhibited narrow micropores with sizes
Fields of Study & Subjects
Coal Properties and Utilization
Carbon Dioxide Capture Technologies
Coal and Its By-products
Publication details
- Journal / source
- Archives of Mining Sciences
- Pages
- 143–159
- Publication date
- 27 March 2026
- Language
- PL