Несущая способность причального сооружения типа больверк в зависимости от параметров усиления грунтовыми анкерами в условиях Приморского края
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Исчерпание несущей способности причальных тонких стенок города Владивостока в результате морской коррозии, а также их моральный износ в соответствии с растущим грузооборотом делают актуальным вопрос реконструкции портовой инфраструктуры. Наиболее распространённым способом усиления сооружений типа больверк является строительство оторочки, однако существуют и альтернативные методы: цементация грунтов, вертикальное и горизонтальное экранирование, установка дополнительного ряда анкерных устройств. С развитием буровых технологий широкое распространение приобретают методы, связанные с созданием грунтоцементных элементов, например цементации грунтов. Однако усиление сооружения грунтовыми анкерами не получило подобного отклика в местной практике. В данной работе приведено численно-параметрическое исследование несущей способности на вертикальную нагрузку причального сооружения типа тонкой стенки в зависимости от параметров грунтовых анкеров. С использованием программы конечных элементов PLAXIS 2D исследовано влияние таких параметров, как глубина у сооружения, ширина зоны приложения вертикальной нагрузки, уровень установки грунтовых анкеров, длина и диаметр грунтового тела. Эксперимент выявил возможность увеличения несущей способности до 4,2 раза в зависимости от глубины у сооружения. Была предложена методика выбора параметров конструкции грунтовых анкеров в зависимости от глубины у сооружения и величины эквивалентной нагрузки на тыловую область причала. Данная методика сформирована для применения в Приморском крае. The exhaustion of the bearing capacity of the thin berthing walls of Vladivostok as a result of marine corrosion, as well as their moral deterioration in accordance with the growing cargo turnover, make the issue of reconstruction of the port infrastructure urgent. The most common way to strengthen bolverk-type structures is to build a rim, but there are alternative methods: soil cementation, vertical and horizontal shielding, and the installation of an additional row of anchoring devices. With the development of drilling technologies, methods related to the creation of soil-cement elements, such as soil cementation, are becoming widespread. However, the reinforcement of the structure with soil anchors has not received a similar response in local practice. This paper presents a numerical and parametric study of the load-bearing capacity of a thin-wall mooring structure depending on the parameters of the ground anchors. Using the PLAXIS 2D finite element program, the influence of parameters such as the depth of the structure, the width of the vertical load application zone, the installation level of soil anchors, and the length and diameter of the soil body was studied. The experiment revealed the possibility of increasing the load-bearing capacity up to 4,2 times, depending on the depth of the structure. A methodology has been proposed for selecting the design parameters of the ground anchors depending on the depth of the structure and the equivalent load on the rear area of the berth. This methodology has been developed for use in Primorsky Krai.
Fields of Study & Subjects
Geotechnical Engineering and Soil Stabilization
Geotechnical Engineering and Soil Mechanics
Geotechnical Engineering and Analysis
Publication details
- Journal / source
- ВЕСТНИК ИНЖЕНЕРНОЙ ШКОЛЫ ДВФУ
- Issue
- 1(66)
- Pages
- 208–221
- Publication date
- 31 March 2026
- Language
- RU