An approach for the calculation of characteristics I – V and P – V curves in BIPV arrays

Read full text Summarise with VIRAT
Authors: Luz Adriana Trejos-Grisales
Cited by: 0
References: 19

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Introduction: This paper presents a procedure for estimate the radiation and the shadows effect in vertical surfaces for BIPV solutions as facades. The procedure allows to calculate a radiation profile which can be used to calculate the I –V and P – V curves of a BIPV array installed on the vertical surface to obtain its power. On the other hand, the curves are useful for implementing solutions such as MPPT control strategies. Objective: The main objective of this work is to obtain a procedure based on mathematical and geometry relationships to calculate the radiation and shadows effect in vertical surfaces and obtain profiles for analyzing BIPV arrays installed on the vertical surface in terms of the I –V and P – V curves. Methodology: The proposed approach has three stages. The first is oriented to the study of Sun behavior in order to calculate the required information for estimating the radiation components for vertical surfaces. The second stage is oriented to analyze the effect of shadows of object in the neighborhood of the vertical surface by using the information concerning the Sun position; the information of the first and second stage allow to obtain the radiation profile to analyze a BIPV array installed on the vertical surface. The third stage is oriented to the calculation of the I –V and P – V curves of a BIPV array. Results: An approach for the calculation the radiation behavior and shadow analysis for vertical surfaces in the context of BIPV solutions was developed to obtain the I –V and P – V curves of a BIPV array. The solution was implemented in Matlab® but it can be extended to other platforms for a more generalized used. Conclusions: The proposed solution allowed to obtain the I –V and P – V curves of a study case BIPV array based on the radiation and shadow analysis of the vertical surface. Results were compared with simulation in BIMsolar software. The percentage of area affected by shading calculated by using the proposed solution differs 1.9 % from BIMsolar results. MAPE values for solar altitude and solar azimuth angles was 15.51 % while the MAPE for the total estimated radiation was 15.66 %. The developed procedure can be the base for further analysis to contribute to the development of new solutions in PV systems.

Fields of Study & Subjects

Photovoltaic System Optimization Techniques Solar Radiation and Photovoltaics Solar Thermal and Photovoltaic Systems

Publication details

Journal / source
Ingeniería y Competitividad
Volume
28
Issue
1
Publication date
20 March 2026
Language
EN