Stability of Three-Dimensional Rotating Boundary Layers

Read full text Summarise with VIRAT
Authors: Maha Alshahrani
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In this study, the relationship between surface roughness and the linear stability of the threedimensional boundary-layer flow past a rotating disk has been investigated. The rotating-disk structure has been a classical paradigm for the laminar-turbulent transition, but the role of roughness in altering the crossflow and the Coriolis instability remains inconclusive. Two opposing formulations of roughness are studied, the geometric YHP model, whereby the physical form of the wall is manipulated by the sinuoidal concentric grooves, and the phenomenological Miklavcic-Wang (MW) slip model, whereby the wall-shear transmission is also modified by the application of anisotropic slip boundary conditions. The first part of the thesis focuses on the YHP roughness formulation. Profiles of spatially averaged base-flow are calculated at various roughness amplitudes, and linear stability is assessed for stationary and travelling disturbances with frequencies ¯ω ∈ [−10, 10]. The findings demonstrate that concentric roughness stabilises the inviscid type-I (crossflow) instability at all frequencies, increases the critical Reynolds number, and reduces the unstable region. Conversely, the viscous type-II (Coriolis) instability is highly destabilised, especially at positive frequencies, where the unsteady travelling waves enhance the mode. This is further demonstrated by an asymptotic study of the type-I instability at large Reynolds numbers, which is non-stationary, yielding predictions for the effective wavenumbers and angles of the spirals that are closely matched by numerical results. The second part of the thesis develops and implements the MW slip-based model for concentric, radial, and isotropic roughness. Slip is incorporated into both the base flow and the perturbation equations, allowing a comprehensive analysis of how anisotropic shear modification influences instability behaviour. The MW model predicts strong destabilisation of both type-I and type-II modes under slip conditions, with sensitivity depending on both the slip direction and magnitude. Comparisons with the YHP results reveal that geometric roughness and slip-driven roughness act through fundamentally different physical mechanisms, resulting in contrasting stability trends. The combination of these analyses provides a single picture of how roughness changes rotating-disk instabilities. The thesis highlights the stabilising and destabilising nature of roughness in its dual action, based on its representation and the frequency of the disturbance. A number of prospects for future research are identified: non-parallel and nonlinear extensions, DNS validation, and the development of hybrid roughness models. Note that a research article is submitted by Maha et al. [2], using the results from this study.

Fields of Study & Subjects

Fluid Dynamics and Turbulent Flows Heat Transfer Mechanisms Computational Fluid Dynamics and Aerodynamics

Publication details

Journal / source
University of Leicester
Publication date
25 March 2026
Language
EN
Document type
Thesis