Developing Empirical Relationships for the Splitting Tensile Strength of Plain Concrete Based on Compressive Strength

Read full text Summarise with VIRAT
Authors: Kareem Abdullah Muhammed
Cited by: 0
References: 8

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This research studies the tensile strength of various samples of conventional concrete at different levels of compressive strength. Tensile strength was measured experimentally through a split test of cylindrical samples. The split test was adopted for cylindrical samples because it provides more accurate results than direct tensile testing. Cylindrical specimens were used in this study, as cubic samples typically overestimate actual strength. The compressive strength of the specimens ranged from 19 to 40 MPa at an age of 28 days. Statistical analysis was employed to derive an equation for estimating the tensile strength of the specimens based on their compressive strength. The study found that most standard codes and existing empirical equations overestimated tensile strength compared to the experimental results. Furthermore, a unified formula was used to predict the tensile strength of concrete specimens across a broad range of compressive strengths. Based on the analysis, two empirical formulas were proposed to predict tensile strength from the measured compressive strength values. The first formula was developed to estimate the tensile strength of specimens with compressive strengths below 30 MPa, while the second applies to those exceeding 30 MPa. For comparison, the formulas propo-sed in previous studies and the current investigation were applied to a large number of concrete specimens with compressive strengths ranging from 18.69 to 69.16 MPa. The results indicated that the formulas proposed in this study demonstrated superior predictive accuracy compared to those from existing literature. Statistical analysis showed that the proposed formulas achieved an S.D. of 0.124 and a C.O.V. of 12.65% for (ft Calc. / ft Test) ratio. These results represent a higher level of precision compared to other researchers' equations, where values ranged from 0.127–0.203 and 13.24–14.54%, respectively.

Fields of Study & Subjects

Structural Behavior of Reinforced Concrete Innovative concrete reinforcement materials Civil and Structural Engineering Research

Publication details

Journal / source
مجلة العلوم الهندسية و تكنولوجيا المعلومات
Volume
10
Issue
1
Pages
113–131
Publication date
15 March 2026
Language
EN