COMPARISON OF MECHANICAL PROPERTIES OF MATERIALS USED IN THE 3D PRINTING TECHNOLOGY

Read full text Summarise with VIRAT
Authors: Patryk Krawulski, Sylwia Bazychowska, Włodzimierz Kończewicz, Bartosz Adamkiewicz
Cited by: 0
References: 8

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Three-dimensional printing techniques enable three-dimensional objects to be formed by successive layers of material, according to a previously developed numerical model. The primary aim of this study is to analyse the mechanical properties of selected materials used in the spatial printing of machine components and marine equipment. Experimental testing of samples made using the additive method was carried out using an orthogonal plan, in which the experimental factors were selected in such a way that the influence of each factor on the measurement results could be independently assessed. This approach allowed for the elimination of mutual interference between variables and the obtaining of reliable and comparable results. As part of the research, a set of samples with five different filling levels was prepared: 20%, 40%, 60%, 80% and 100%. They were then subjected to a static tensile test to determine such strength parameters as yield strength, tensile strength, Young's modulus and relative strain. The results obtained were summarised in the form of graphs and tables, which enabled a detailed analysis of the influence ofthe internal structure and filling level on the mechanical properties of the tested materials.

Fields of Study & Subjects

Additive Manufacturing and 3D Printing Technologies Additive Manufacturing Materials and Processes Innovations in Concrete and Construction Materials

Publication details

Journal / source
Scientific Journal of Gdynia Maritime University
Issue
137
Pages
58–71
Publication date
1 January 2026
Language
EN