Effects of the cutting mode on surface roughness in hard turning of 90CrSi tool steel under MQL and nanofluid MQL conditions
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
The paper aims to study the effects of cooling/lubricating mode, cutting speed, and feed rate on the surface roughness Ra in the hard turning process of 90CrSi tool steel (60 ÷ 62 HRC) under pure MQL and nanofluid MQL conditions. The influences of input parameters were studied by using the factorial experimental design. The results showed that the feed rate is the most influential effect on surface roughness, followed by cooling/lubricating mode and then the cutting speed. Meanwhile, the interaction effects cause the insignificant impacts on the surface roughness Ra. Moreover, MQL technique using Al2O3 nano cutting oil, cutting speed of 160 m/min, and feed rate of 0.05mm/rev are the proper selection and should be used to achieve the smaller surface roughness Ra values.
Fields of Study & Subjects
Advanced machining processes and optimization
Advanced Surface Polishing Techniques
Advanced Machining and Optimization Techniques
Publication details
- Journal / source
- Global Journal of Engineering and Technology Advances
- Volume
- 26
- Issue
- 3
- Pages
- 227–231
- Publication date
- 27 March 2026
- Language
- EN