INFLUENCE OF THERMAL BARRIER COATINGS ON THE SERVICE LIFE OF GAS TURBINE BLADES

View at publisher Summarise with VIRAT
Authors: N. V. Abraimov, I. G. Petukhov, V. V. Orekhova, M. S. Zarypov, Yu.A Gadieva
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

The results of a study of the influence of gasostatically treated thermal barrier coatings (TBCs) on the service life characteristics of gas turbine blades under multicycle mechanical and thermocyclic tests are presented. It is shown that the gasostatically treated thermal barrier coating of the system (Ni-Cr-Al-Ta-W-Hf-Si-Y) +ZrO2·8%Y2O3 meets the requirements of thermocyclic durability of turbine blades operating at a temperature of 1100 °C. It is noted that to ensure thermocyclic durability of blades at a temperature of 1150 °C, coatings with an increased aluminum reserve up to 26-27%, additionally alloyed with 0.4-0.8% gadolinium, are required. It is shown that the use of gasostatic treatment in TBC provides a significant increase in the endurance limit of turbine blades by 25-30 MPa. It was established that the presence of a ceramic TBC layer with a thickness of 90-120 µm does not reduce the endurance limit of turbine blades under multicycle fatigue.

Fields of Study & Subjects

High-Temperature Coating Behaviors High Temperature Alloys and Creep Surface Treatment and Coatings

Publication details

Journal / source
Electrical Metallurgy
Volume
0
Issue
2
Pages
15–24
Publication date
1 January 2026
Language
EN