Multi-functional resins as photoreactive binder for bio-content UV curable nail coatings

This study investigates the structure-property relationships of multi-functional urethane acrylate resins designed as photoreactive binders for UV-curable nail coatings.Four systems were examined: a commercial resin urethane dimethacrylate (UDMA), a bio-based acrylated epoxidized soybean oil (AESO), and two newly synthesized bio-based urethane acrylates derived from 1,3-propanediol (PDO-UA) and eugenol (EUG-UA).Photopolymerization kinetics were analyzed by realtime FTIR, while the properties of the cured coatings were also determined.The mechanical and thermal behavior of selfsupporting polymer films was evaluated by tensile testing and DSC analysis.The UDMA network exhibited the highest crosslink density, reflected in its high modulus (≈0.5 GPa), tensile strength (≈15 MPa), and T g (≈60 °C), making it suitable for use as a top coat.AESO showed moderate stiffness and flexibility, whereas PDO-UA and EUG-UA formed soft, low-T g (-12 and -17 °C) and highly deformable networks typical of elastomeric materials.The combined mechanical and thermal results confirmed that crosslink density strongly governs coating performance and applicability.This study demonstrates that blending UDMA with bio-based oligomers enables the design of sustainable, UV-curable nail lacquers with an optimal balance of hardness, flexibility, and adhesion to the natural nail plate.