Effect of curing system and blowing agent content on the cellular morphology, mechanical and thermal properties of EPDM foam

In this study, the effect of the amount of blowing agent and the type of sulfur curing system on the cellular structure, thermal, and mechanical properties of ethylene-propylene-diene monomer (EPDM) foam was investigated.Three types of sulfur curing systems including efficient, semi-efficient and conventional and three variable levels of azodicarbonamide (ADC) were considered; as a result, nine EPDM foam formulations were evaluated.Curing process parameters were measured using cure rheometry and cellular structure was examined by optical microscopy images, determining the average cell size and size distribution.For evaluating physical and mechanical properties, density and compression set tests were performed.Thermal conductivity tests were conducted on selected samples.Building energy modeling was performed using DesignBuilder software to evaluate the thermal insulation performance of the foams.The results showed that the type of curing system and the amount of ADC significantly affect cell morphology, density, and mechanical properties.Overall, a decrease in density leads to reduced mechanical properties.The modeling results indicated that using EPDM foams as building thermal insulation can reduce the energy consumption of heating, ventilation, and air conditioning (HVAC) systems by up to 20%.