Design and Experiment of Narrow Row Spacing Maize Seedling Belt Treatment Device Based on DEM-MBD Joint Simulation in Wheat Stubble Field

Aiming at the problems of inter-row straw congestion, soil accumulation, and consequent uneven seeding depth during high-speed sowing with narrow row spacing under the summer maize no-tillage sowing mode in the Huang-Huai-Hai region, this study proposed a maize seedling belt pre-sowing treatment device suitable for narrow row spacing operation by analyzing the physical properties of straw and soil in the region. Dynamic analysis of the mechanical device was carried out, and the key factors affecting the straw removal effect of the seedling belt and the degree of soil disturbance were identified as machine offset distance, traction speed, and straw-cleaning wheel angle. Discrete element method simulation experiments were conducted via EDEM-ADAMS coupling; the key factors were simulated and optimized, and the optimal parameter combination of the device was determined as follows: machine offset distance of 165 cm (the relative distance between the front and rear positions of the right wheel of adjacent unit cleaning components), traction speed of 11 km/h, and straw-cleaning wheel angle of 44°. Field validation tests of the prototype were performed. The test results showed that the overall straw removal rate of the seedling belt reached 95%, and no large-scale straw and soil accumulation caused by pushing was observed between rows. Compared with the simulation results, the error of straw removal rate was only 0.5%. Sowing comparison tests were conducted, and the results indicated that the device could significantly improve the uniformity of seeding depth and meet the seedling belt quality requirements for high-speed sowing with narrow row spacing of summer maize. This study provides new ideas and methods for the design of straw-cleaning mechanisms in no-till seeding systems.