Design Optimization and Experiment of the Hammer Blade for Straw Crushers

Read full text Summarise with VIRAT
Authors: Yutao Wang, Shufeng Tang
Cited by: 0
References: 7

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

To address the low operational efficiency and suboptimal crushing quality of conventional straw crushers, a serrated hammer blade was designed and optimized. The working mechanism of straw crushing and the force interaction between the hammer blade and straw were theoretically analyzed, and a finite element model was established to simulate straw fragmentation under impact. The crushing performances of serrated, rectangular, and stepped hammer blades were comparatively evaluated, and cutting force and cutting time were selected as key response indicators to investigate the effects of structural parameters. Using Latin hypercube sampling and a Kriging surrogate model, the relative importance of hammer blade parameters was quantified, followed by multi-objective optimization using the NSGA-II algorithm. The results indicate that the significance of the influencing factors follows the order of blade thickness, blade width, tooth spacing, and blade length. The optimal hammer blade configuration was determined as 4 mm in thickness, 39 mm in width, and 4 mm in tooth spacing. Crushing experiments demonstrate that, compared with the conventional rectangular hammer blade, the optimized serrated design increases productivity by 17.49% and improves the pass rate by 5.02%. This study provides practical parameter support and technical guidance for the low-cost upgrading and performance improvement of straw crushing equipment.

Fields of Study & Subjects

Agricultural Engineering and Mechanization Engineering Applied Research Mineral Processing and Grinding

Publication details

Journal / source
Applied Sciences
Volume
16
Issue
6
Pages
3062–3062
Publication date
22 March 2026
Language
EN