A Cross-Layer Command-to-Trajectory Planning Framework for Geosynchronous Transfer Orbit–Geostationary Earth Orbit Transfer with an Electric-Propulsion Vectoring Arm

Read full text Summarise with VIRAT
Authors: Songchao Wang, Yexin Zhang, Jian Wang, Jinbao Chen, Jianyuan Wang
Cited by: 0
References: 25

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Electric-propulsion (EP) orbit raising from geosynchronous transfer orbit (GTO) to geostationary Earth orbit (GEO) requires long-duration, continuously steered low thrust, for which small pointing deviations may accumulate over time, and practical execution is constrained by spacecraft attitude and momentum management. This study develops a cross-layer command-to-execution framework that couples mission-level thrust-command generation with smooth trajectory planning of an EP vectoring arm. At the orbit layer, an engineering-oriented mission-level transfer model with dominant J2 secular correction is used to construct a time-tagged sequence of thrust magnitude and direction commands for the GTO–GEO transfer. At the execution layer, a 4-DOF revolute arm is modeled using Denavit–Hartenberg kinematics, and the desired thrust directions are mapped to feasible joint trajectories through a direction-only inverse-kinematics formulation cast as a constrained nonlinear least-squares problem with cross/dot residuals, smoothness regularization, and warm-start propagation. In numerical simulation, the GTO–GEO transfer is completed in approximately 278 days with Δv ≈ 3665 m/s, corresponding to a propellant consumption of 175 kg (spacecraft mass from 1800 kg to 1625 kg). The planned joint trajectories remain smooth over the full horizon, with maximum inter-sample variations of 1.84° and 1.04° for the major and minor motion groups, respectively. The numerical geometric thrust-direction tracking error in the kinematic mapping remains at the millidegree level, with a mean of 7.39 × 10−4° and a P95 of 0.00101°. The results demonstrate that the proposed cross-layer interface can generate executable, low-bandwidth joint commands while preserving high geometric consistency with the desired thrust directions in the numerical kinematic mapping sense, thereby providing a practical basis for implementation-oriented studies of EP orbit transfer with vectoring manipulators.

Fields of Study & Subjects

Spacecraft Dynamics and Control Space Satellite Systems and Control Spacecraft Design and Technology

Publication details

Journal / source
Applied Sciences
Volume
16
Issue
7
Pages
3170–3170
Publication date
25 March 2026
Language
EN