Repair of Wellbore Microannuli with Microfine Cement

Read full text Summarise with VIRAT
Authors: Serafin Garcia Fernandez, Daniel Heras Murcia, John C. Stormont
Cited by: 0
References: 52

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This study evaluates the effectiveness of microfine cement (MF) to seal two laboratory-fabricated wellbore microannuli. The samples were characterized with their hydraulic apertures (158 and 85 µm). A rough cement surface paired with a transparent acrylic plate, acting as a steel surrogate, formed the basis of the experimental setup, with the acrylic enabling direct visual monitoring of MF behavior throughout the tests. Hydraulic aperture measurements were taken before and after each repair attempt, with MF injected at constant pressure and a 24 h curing period allowed between successive injections. Four injection cycles were completed per sample. The MF cement had a d95 = ~14 µm and a w/c of 1.45. Results show progressive reduction in hydraulic aperture from 158 µm to 20 µm and from 85 µm to 8 µm, but complete sealing was not achieved. Visual observations revealed that bleeding and filtration (plug formation) were the primary mechanisms limiting repair efficiency. These findings highlight the challenges of sealing rough microannuli with MF and suggest that aperture variability and particle filtration strongly influence repair outcomes. Higher injection pressures or alternative materials may be required for complete sealing.

Fields of Study & Subjects

Drilling and Well Engineering Grouting Rheology and Soil Mechanics Concrete and Cement Materials Research

Publication details

Journal / source
Applied Sciences
Volume
16
Issue
7
Pages
3257–3257
Publication date
27 March 2026
Language
EN