Anionic Polyacrylamide Combined with Slag for Enhancing Flocculation–Preloading–Electro-Osmosis Consolidation of High-Water-Content Bentonite Slurry

The disposal of high-water-content bentonite slurry generated from underground construction presents prominent environmental and technical challenges, calling for low-carbon and efficient consolidation technologies. This study proposes an integrated flocculation–preloading–electro-osmosis (FPE) method using anionic polyacrylamide (APAM) combined with ground granulated blast furnace slag to strengthen dewatering and stabilization of bentonite slurry. Settlement column experiments were conducted to determine the optimal APAM dosages. A series of FPE consolidation experiments were performed to monitor drainage, settlement, electrical current, temperature and post-treatment soil properties, combined with microstructural analysis to reveal the synergistic mechanism. The results show that APAM creates abundant seepage channels via adsorption bridging and flocculation, significantly accelerating early-stage drainage and settlement rates without obviously increasing total drainage and final settlement. The polymer hydrogel homogenizes soil structure, leading to a gradual increase in moisture content and decrease in shear strength from anode to cathode, and effectively eliminates cracking during electro-osmosis. The temporary seepage channels induce a faster initial current rise, while the polymer coating increases apparent resistivity after free water discharge, thereby reducing current and temperature during the electro-osmotic consolidation stage. Appropriate APAM dosage thickens the electric double layer to raise the free swell ratio, whereas excessive dosage restricts swelling by particle coating. Microscopic observations confirm that chain-structured APAM and flocculent C-(A)-S-H hydration products cement soil particles and fill pores, improving soil integrity and shear strength. Overall, APAM improves early-stage efficiency and soil uniformity/integrity. In addtion, its combined effect with slag on bentonite shear strength increase is relatively higher than that of 0% slag condition. The integrated FPE technique realizes synchronous high-efficiency dewatering and low-carbon stabilization of high-water-content bentonite slurry, providing a novel and practical solution for engineering slurry disposal.