Freeze–Thaw Resistance of Class C/Class F Fly Ash Geopolymer Mortars with Different Ash-to-Sand Ratios

Read full text Summarise with VIRAT
Authors: Xiao Li, 楚振宇, Ge Zhu, Tao Yu, Hengqiang Su, Yueyong Shao, Xueying Li, Zhenpeng Jiang, Zhenzhen Jiao
Cited by: 0
References: 61

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This paper investigates the freeze–thaw durability of geopolymer mortars synthesized from class C and class F fly ash, with varying ash-to-sand ratios ranging from 1:1 to 1:1.8. Optimizing freeze–thaw resistance is critical for promoting the practical application of geopolymer materials in cold regions, where cyclic freezing and thawing significantly threaten long-term durability. The performance of the mortars was evaluated through laboratory freeze–thaw cycling and natural environmental exposure. Freeze–thaw resistance was assessed by measuring mass loss and compressive strength after 60 laboratory cycles and 90 days of natural environmental exposure, while specimens cured under standard conditions were used as reference samples. The results demonstrate that the ash-to-sand ratio significantly influences durability performance. After 60 laboratory freeze–thaw cycles, specimens with a ratio of 1:1 exhibited a severe mass loss of 17.31%, whereas those with ratios between 1:1.4 and 1:1.8 maintained mass losses below 5%. Under natural environmental exposure, which reflects multiple coupled environmental factors such as moisture fluctuation, drying, and carbonation rather than freeze–thaw action alone, mass loss increased from approximately 2.26–3.64% at 15 days to 9.00–11.74% at 90 days. The geopolymer mortars with an ash-to-sand ratio of 1:1.4 exhibited superior freeze–thaw resistance, characterized by the lowest mass loss and the highest compressive strength. Microstructural and phase analyses indicated environment-dependent phase evolution and pore structure changes in the geopolymer matrix, which were associated with the observed durability performance. These findings contribute to the understanding of durability in geopolymer systems, offering insights into optimizing ash-to-sand ratios for enhanced freeze–thaw resilience.

Fields of Study & Subjects

Concrete and Cement Materials Research Building materials and conservation Geotechnical Engineering and Soil Stabilization

Publication details

Journal / source
Buildings
Volume
16
Issue
7
Pages
1288–1288
Publication date
25 March 2026
Language
EN