Crack Propagation Process of Concrete Under Sustained Loading with DIC Technique

Concrete structures frequently experience sustained loading during service, which may lead to crack propagation and eventual failure. In this study, three-point bending beams with heights of 200 mm and 300 mm were subjected to sustained load levels of 0.82, 0.84, and 0.86 of the peak load. The crack propagation process was monitored using the Digital Image Correlation (DIC) technique to capture full-field displacement and strain distributions. Analysis of the crack opening displacement (COD) and the fracture process zone (FPZ) revealed that concrete exhibits brittle fracture behavior under sustained loading, with the FPZ not fully developed at creep failure. The crack propagation process was further characterized into three stages. In the initial stage, crack development is mainly governed by viscoelastic deformation. In the intermediate stage, both viscoelasticity and the gradual decay of cohesive stresses within the FPZ contribute to crack growth. In the final unstable acceleration stage, crack propagation is dominated by cohesive stress degradation. Importantly, the crack length at creep failure closely matches the corresponding crack length on the descending branch of quasi-static loading, indicating a direct link between time-dependent creep fracture and quasi-static post-peak behavior. These results provide new insights into the time-dependent fracture mechanics of concrete, revealing the evolution of damage under long-term loading. The study emphasizes material behavior, including FPZ development and stage-wise crack propagation, offering a mechanistic understanding of creep fracture beyond the evaluation of measurement techniques.