Self-Supported High-Entropy Alloy Selenide Electrodes for Efficient Acid/Alkaline Amphoteric Water Electrolysis

Read full text Summarise with VIRAT
Authors: Tong Zhai, Shicao Li, Shouquan Xiang, Hua Tan, Junsheng Yang, Huangchu Chen
Cited by: 0
References: 48

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In this work, Fe, Co, Ni, Cu, and Mo powders were used as starting materials to prepare high-entropy alloy (HEA) thin films by a coating and vacuum sintering process. Using the HEA thin film as the substrate, selenium was subsequently deposited by chemical vapor deposition (CVD) to obtain high-entropy alloy selenide thin films (HEASe). The phase structure, surface chemical states, morphology, and elemental distribution of the porous films were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The electrocatalytic hydrogen evolution performance of the electrodes was evaluated using a three-electrode configuration in 0.5 M H2SO4, 1 M KOH, 1 M KOH + 0.5 M NaCl, and 1 M KOH + 0.5 M Na2S solutions. The results indicate that the HEA selenide thin-film electrodes exhibit favorable electrocatalytic behavior in all four electrolytes. Among them, HEASe-450 shows the best overall performance. In 0.5 M H2SO4, it requires an overpotential of only 57.6 mV to reach a current density of 10 mA cm−2, with a Tafel slope of 146.96 mV dec−1. In 1 M KOH, the overpotential at 10 mA cm−2 is 50.1 mV, and the corresponding Tafel slope is 142 mV dec−1. In 1 M KOH + 0.5 M NaCl, the overpotential is 52.7 mV with a Tafel slope of 122.72 mV dec−1. In 1 M KOH + 0.5 M Na2S, an overpotential of 85 mV is required, and the Tafel slope increases to 236 mV dec−1.

Fields of Study & Subjects

Electrocatalysts for Energy Conversion High Entropy Alloys Studies Fuel Cells and Related Materials

Publication details

Journal / source
Coatings
Volume
16
Issue
4
Pages
398–398
Publication date
25 March 2026
Language
EN