Research on Activation of Solid Waste Through Microbial Desilification

To investigate the biosilicification capabilities of Bacillus mucilaginosus and Bacillus polymyxa, silicon concentrations in supernatants from quartz and calcium silicate cultures were monitored over a 12-day period using inductively coupled plasma optical emission spectrometry (ICP-OES). Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to evaluate changes in the absorption intensity of Si–O–Si characteristic peaks, crystalline phase transformations in the reaction products, and the microstructural morphology of quartz and calcium silicate before and after microbial leaching. The results show that after leaching with B. mucilaginosus, the dissolved silicon concentration in the quartz supernatant reached a maximum of 73.868 mg/L on day 8. In contrast, following treatment with B. polymyxa, the silicon concentration in the calcium silicate supernatant peaked earlier, at 149.153 mg/L on day 4. After microbial leaching, both substrates exhibited marked changes in the intensity of the infrared absorption peaks at 1071 cm−1 and 1083 cm−1, suggesting the formation of Si–O–R type organosilicon complexes. Iron tailings (containing inert silica) and fly ash (containing active silica) were selected for experimental validation. Following treatment with B. mucilaginosus for desilication over an 8-day period, the activity index of iron tailings increased from 77.83% to 90.51%, while that of fly ash rose from 66.32% to 85.01%. ICP-OES analysis confirmed that under the action of B. mucilaginosus, the trends in silicon concentration and activity index in the supernatant of silica-containing solid wastes, such as iron tailings and fly ash, were consistent with those observed in quartz, thereby demonstrating effective biological desilication. These findings provide novel insights into the development of environmentally sound disposal methods for a wider range of solid waste types.