Dry Sliding Tribology of γ-TiAl-Based Alloys

Read full text Summarise with VIRAT
Authors: Steven Magogodi, M.N. Mathabathe, Charles Witness Siyasiya, Amogelang Sylvester Bolokang, Michael Oluwatosin Bodunrin, Mbavhalelo Maumela
Cited by: 0
References: 51

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Incorporating TiAl alloys in engine applications offers benefits including reduced fuel consumption and improved efficiency. However, understanding the wear behaviour of these materials is an important consideration due to their use in harsh environments involving movable parts. This study investigated the wear behaviour and mechanisms of Ti–48Al–2Nb–0.3Si-1Sn (TiAl–S1) together with Ti–48Al–2Nb–0.3Si (TiAl–S0) as a reference alloy against an alumina ball. Scanning electron microscopy (SEM) analysis showed that the addition of Sn refined the lamellar structure from 216 μm to 130 μm and promoted more uniform deformation. SEM observations also indicated that abrasive wear is the dominant mechanism in the TiAl alloys. The TiAl–S1 exhibited lower hardness, resulting in deformation of wear debris and promoting third body acting as a lubricant. SEM-EDS revealed that the tribo-layer and wear debris originated from the TiAl materials rather than the counterpart alumina material. Both alloys demonstrated noble wear resistance, with a wear rate of 7.542 × 10−6 mm3/Nm for TiAl–S1 and 6.729 × 10−6 mm3/Nm for TiAl–S0. Even though both TiAl alloys experienced abrasive wear mechanisms, the addition of Sn emerges as a promising alloying strategy, for enhancing ductility without significantly increasing material loss.

Fields of Study & Subjects

Intermetallics and Advanced Alloy Properties Tribology and Wear Analysis Mechanical stress and fatigue analysis

Publication details

Journal / source
Crystals
Volume
16
Issue
4
Pages
228–228
Publication date
30 March 2026
Language
EN