Research on Black-Start Control Methodologies for DC Collection Wind Farms

Under extreme fault conditions or during maintenance restarts, DC collection wind farms may experience a total blackout due to protective isolation. Addressing the black-start challenges arising from the unidirectional power flow structure and weak damping characteristics inherent to DC step-up collection wind farms, this paper proposes a sequential black-start control scheme predicated on grid-source coordination. A representative topology and an equivalent black-start model of the DC collection system are established to analyze the start-up mechanism and to design an active voltage build-up strategy with virtual impedance for the grid-side Modular Multilevel Converter (MMC). Meanwhile, generator-side permanent-magnet direct-drive wind turbines exploit their self-excitation capability and optimized pitch control to realize islanded self-bootstrapping and stable rotational speed. In addition, we develop a two-stage soft cut-in strategy that combines open-loop voltage scanning for pre-synchronization with closed-loop constant-current ramping of DC/DC converters, together with control logic for sequentially connecting multiple units to the DC grid. Simulation results show that the proposed approach smoothly restores the system from a zero-energy state to the rated operating point without external power sources, confirming the feasibility of full-farm start-up using the grid-side converter station and unit self-bootstrapping.