Exploiting Windowpane Heat Losses for Indoor Energy Harvesting in Buildings

Buildings account for approximately 40% of global energy consumption, with heating, ventilation and air conditioning systems being the primary contributor. Building management systems offer a promising solution for enhancing energy efficiency, particularly in retrofitting older or protected buildings. However, powering numerous wireless sensors required by BMS remains a logistical challenge. This study investigates the feasibility of harvesting thermal energy lost through windowpanes to power ultra-low-power IoT sensors, a concept that was not previously explored in the literature. A thermoelectric energy harvester was developed using a TEC1-12710 thermoelectric module and an EM8900 ultra-low-voltage DC-DC boost converter. Laboratory and field experiments were conducted to evaluate the system’s performance under various thermal conditions, with electrical energy accumulated in a 0.01 mF capacitive energy storage. In laboratory conditions, a temperature difference of ~1 °C enabled the system to generate up to 3.24 V with a power density of 3 mW/m2. Field tests during winter yielded lower performance (1.43 V, 1.9 mW/m2), which was attributed to suboptimal thermal gradients and operating points. It was thus experimentally shown that windowpane heat losses can be effectively harnessed for indoor energy harvesting. While the current efficiency is limited, the approach shows promise for powering battery-free IoT devices.