Development and Comparative Analysis of Vortex Generators for Boundary Layer and Separation Control on the Suction Side of Wind Turbine Blades

Read full text Summarise with VIRAT
Authors: Andrei Valentinovich Chukalin, Oleg Savelov, Ruslan Vladimirovich Fedorov
Cited by: 0
References: 34

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Vortex generators (VGs) are considered in this study as an effective means of controlling the boundary-layer structure and suppressing flow separation on the suction sides of wind turbine blades. An original geometry of a surface-mounted VG has been developed and experimentally investigated, providing a stable modification of the near-wall flow over a wide range of incoming flow velocities. The aerodynamic effect is attributed to the formation of spatially diverging vortex structures that enhance momentum transfer from the outer flow region toward the near-wall layer, thereby increasing the energy level of the boundary layer. This results in an extension of the attached-flow region and an increase in the mean flow velocity over the suction side of the airfoil by up to 6.5%. The proposed configuration enables a 15% increase in the installation spacing of surface-mounted VGs without loss of control efficiency. Experimental investigations were carried out in a subsonic aerodynamic facility using the Particle Image Velocimetry (PIV) method at free-stream velocities of up to 30 m/s. The obtained data will be used for the development and validation of a mathematical model intended for parametric studies of the influence of surface-mounted VGs on various wind turbine blade airfoils under a wide range of atmospheric turbulence conditions.

Fields of Study & Subjects

Plasma and Flow Control in Aerodynamics Wind Energy Research and Development Turbomachinery Performance and Optimization

Publication details

Journal / source
Energies
Volume
19
Issue
7
Pages
1637–1637
Publication date
26 March 2026
Language
EN