Physics-Based Modelling of Pine Needle Surface Fires and a Single Douglas Fir Tree: Comparison with Experiments

Wildland fires, including surface and crown fires, present significant challenges for ecosystems and forest management. Accurate fire modelling is crucial for risk assessment and mitigation strategies. The Fire Dynamics Simulator (FDS) v6.8.0, developed by the National Institute of Standards and Technology (NIST), is a physics-based model that simulates fire behaviour by incorporating advanced physics and chemistry. However, its reliability requires thorough validation. This study validates FDS 6.8.0’s performance in modelling both surface fires and single tree burning. Two separate simulation sets were conducted. For surface fires, pine needle fuel beds were used at a laboratory scale to examine fire behaviour on slopes of 0°, 10°, and 20°. The results were validated against experimental data. A burning Douglas fir tree was simulated, and the results were compared with experimental measurements. The surface fire simulations at 0° and 10° slopes showed strong agreement with experimental data. In single-tree burning, both experimental and simulated results exhibited similar trends, with a rapid increase to a peak mass-loss rate (MLR) followed by a gradual decline. Validating FDS 6.8.0 forms an essential first step toward supporting the investigation of complex wildland fire behaviour, such as surface-to-crown fire transition, canyon fire, and dynamic escalation, using the same FDS version.