Study on a Thermally Crosslinking Clay-Free Weak Gel Water-Based Drilling Fluid

In this study, a thermally crosslinking clay-free weak gel water-based drilling fluid based on salt-responsive polymers and crosslinking agents was investigated as a promising and feasible strategy. Firstly, a salt-tolerant polymer was synthesized using N,N-dimethylacrylamide (DMAA), [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfonopropyl)ammonium hydroxide (DMAPS), and acrylamide (AM). BPEI10,000 was selected as the thermal crosslinking agent. The optimal crosslinking was achieved at 180 °C and 36% NaCl, with RMFL at 2.0% and BPEI10,000 at 0.1%. Performance evaluation demonstrated that the crosslinking between RMFL and BPEI10,000 could enhance the AV, PV, and YP of the RMFL(BPEI10,000)/CF-WBDFs after aging at 180 °C for 16 h and reduce FLAPI. The RMFL(BPEI10,000)/CF-WBDFs exhibited appropriate shear-thinning behavior, viscoelasticity, thixotropy, and recoverable viscosity under high-temperature, high-salinity, and high-pressure conditions. Mechanism analysis revealed that RMFL and BPEI10,000 could form a predominantly negatively charged, three-dimensional crosslinking weak gel at high temperatures. The crosslinking weak gel could form dense filter cakes, improving rheological properties and reducing filtration loss of CFWBDFs in high-temperature, high-salinity environments. This paper proposed a novel method to address the technical challenge of rheological performance failure of CFWBDFs, offering valuable insights for subsequent investigations.