Assessing the Environmental Sustainability of Agro-Waste Fiber-Reinforced PLA Composites Through Life Cycle Assessment

Agricultural residues and agro-waste are increasingly recognized as valuable reinforcements for sustainable composite materials. Natural fibers derived from these biomasses offer biodegradability, low density, renewability, and potential environmental benefits. However, their performance and sustainability depend strongly on extraction, surface treatment, and processing conditions. Therefore, evaluating the environmental emissions associated with natural fiber biocomposites is essential before claiming sustainability advantages. In this research, flax, jute, kenaf, and bagasse fibers were extracted and treated using an eco-friendly sodium bicarbonate solution, then incorporated into polylactic acid (PLA) matrix to fabricate biocomposites via injection molding. A life cycle assessment (LCA) was conducted using the ReCiPe midpoint (H) method, with a functional unit defined as “per kg” of manufactured biocomposite. The results revealed that jute fiber composites generated the highest emissions across several impact categories, including climate change (1.290 × 101 kg CO2-Eq), terrestrial ecotoxicity (6.327 × 101 kg 1,4-DCB-Eq), human toxicity: carcinogenic effects (1.923 kg 1,4-DCB-Eq), and fossil resource use (3.202 kg oil-Eq). Jute also showed a 3.6% increase in terrestrial ecotoxicity and a 19.5% increase in land compared to flax, although it exhibited a 6.5% lower impact related to bagasse. A ±20% electricity-consumption sensitivity analysis further highlighted the dependence of environmental impacts on processing energy demand.