Effects of Process Parameters, Sheet Thickness and Adhesive on Spot Diameter During Resistance Spot Welding of Aluminum Alloys EN AW-5182 and EN AW-6005

Resistance spot welding (RSW) is one of the dominant joining processes in body-in-white manufacturing within the automotive industry, while the use of aluminum alloys continues to increase. This study investigates the influence of key process parameters on the spot diameter in RSW of the aluminum alloys EN AW-5182 (AL5-STD) and EN AW-6005 (AL6-HDI). Experiments were performed using industry-standard robotic welding equipment in a partially automated welding cell. Welding current, electrode force, sheet thickness (1–3 mm), and adhesive application were systematically varied. The welded joints were evaluated by destructive testing to determine spot diameter. The results show that higher welding currents increase the spot diameter for both alloys, while higher electrode forces decrease it. EN AW-5182 exhibited a high tendency toward expulsion, whereas no expulsions occurred for EN AW-6005 under identical conditions. The application of the structural adhesive BETAMATE™ 1640 consistently increased the spot diameter.