Wear and Thermal Analysis of Cu-MMC Brake Pad Fabricated by Powder Metallurgy for Railway Braking Applications

This study evaluates the performance of a copper-based metal matrix composite (Cu-MMC) brake pad fabricated by powder metallurgy for high-speed railway braking applications. The material was produced via homogeneous powder mixing, compaction at 650 MPa, and sintering at 950 °C for 2 h to promote densification and metallurgical bonding. The fabricated Cu-MMC exhibited densities of 5.71–5.98 g/cm3, porosities of 5.85–10.1%, and hardness values of 62–73 HV, indicating effective microstructural control. Tribological performance was assessed using a brake dynamometer at an equivalent speed of 160 km/h and a contact pressure of 0.95 MPa. The composite demonstrated a low specific wear rate of 0.11–0.14 cm3/MJ, meeting the TJ/CL 307-2014 standard for high-energy braking. Surface analysis revealed stable frictional behavior dominated by oxidative–abrasive, adhesive, and delamination wear mechanisms. Thermal evaluation showed a maximum operating temperature of 225–235 °C, below the softening temperature of copper, confirming adequate thermal stability.