Time-Domain Electromagnetic Instrument for Onshore and Offshore Petroleum Resource Prospecting

Currently, marine and land oil resources have entered the high-water extraction stage. The remaining oil is dispersed, and the oil–water relationship is complex, making it increasingly difficult to extract. However, traditional electrical logging techniques are limited by the shielding effect of highly conductive steel casing, rendering them unsuitable for formation resistivity measurement in casing wells. Time-domain electromagnetic method overcomes the constraints of downhole push-off systems and casing conditions, enabling continuous measurement and acquisition of formation resistivity parameters. To overcome these limitations, this paper proposes an active compensation method based on differential measurements between specially configured coils, enabling the early response of the formation to be identified, the method enhances weak signal detection capabilities in casing formations. The coils offset part of the casing influence, while the casing background serves as baseline information. A time-domain electromagnetic instrument for metal casing resistivity measurement was developed, along with a ground water tank resistivity calibration device. The experimental results show that the instrument can effectively suppress casing response, obtain formation resistivity signals, and provide effective guidance methods for measuring formation resistivity of casing wells in the ocean and land.