Fabrication and Performance Evaluation of 3D-Printed Zinc–Manganese Flexible Batteries

Read full text Summarise with VIRAT
Authors: Ernan Ju, Cong Yan, Li Ming Wu
Cited by: 0
References: 21

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

/acetylene black composite flexible cathodes is fabricated via 3D printing technology and the aqueous manganese-based zinc-ion flexible batteries are assembled. Based on bending and torsion mechanical tests, and the electrochemical tests, the optimal 3D printing electrode structure was determined. The micromorphology of the electrode after mechanical tests shows that when the printed lines of the upper and lower layers form a 30° angle, the electrode sheet exhibits the least damage. Electrochemical tests indicated that it had an ohmic resistance of 2.052 Ω, an interfacial charge transfer resistance of 141.1 Ω, a specific capacity of 103 mAh/g at 50 mA/g, and a specific capacity of 65 mAh/g at 500 mA/g. Compared with traditional coated electrodes, the 3D-printed electrode showed significantly improved diffusion coefficient, conductivity, and cycle stability. The assembled 3D-printed flexible battery could stably power a 1.5 V LED bulb under flat, bent, and twisted states. It provides a feasible solution for the development of high-performance flexible energy storage devices.

Fields of Study & Subjects

Aqueous and Flow Batteries Supercapacitor Materials and Fabrication Advancements in Battery Materials

Publication details

Journal / source
Materials
Volume
19
Issue
7
Pages
1309–1309
Publication date
26 March 2026
Language
EN