Effects of Sand-Coated and Ribbed GFRP Bars in Hybrid GFRP-Steel-Reinforced Concrete Beams
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
The integration of glass fibre-reinforced polymer (GFRP) and steel reinforcement in hybrid RC beams offers durability benefits, yet the specific influence of GFRP surface treatments on bond mechanics remains critical. This study experimentally investigates the performance of hybrid GFRP-steel-reinforced beams under three-point bending, comparing sand-coated and ribbed GFRP bars, while maintaining a constant total reinforcement ratio of 1.4% to isolate interface mechanics. Due to the exploratory nature of the study and the specific specimen matrix, the results are interpreted as observed experimental trends rather than statistically generalised performance metrics. The results indicate that ribbed GFRP bars provide enhance mechanical interlocking; in this specific experimental program, the ribbed GFRP hybrid beam exhibits an observed load capacity approximately 11% greater than the sand-coated specimen in this study and surpassing comparable steel-only beams. Additionally, ribbed configurations demonstrated an observed 15% higher toughness. In contrast, sand-coated hybrid beams exhibited signs of premature bond degradation, quantitatively captured by strain gauge monitoring; sand-coated bars plateaued at 14,000 µε, reaching only 79% of their theoretical rupture capacity. This strain limitation indicates failure by internal slippage rather than material rupture, further evidenced by a 50% reduction in crack propagation compared to ribbed beams. While energy-based ductility indices suggest a marginal 6% advantage for sand-coated bars, both hybrid systems exhibited relatively low energy-based ductility indices (μ < 2), reflecting the linear-elastic nature of GFRP reinforcement. These findings suggest that the mechanical interlock of ribbed surface treatments is more resilient under the combined stress states typical of hybrid configurations, providing a foundational baseline for the development of future numerical models and reliability-based design frameworks for hybrid GFRP-steel-RC systems.
Fields of Study & Subjects
Structural Behavior of Reinforced Concrete
Innovative concrete reinforcement materials
Masonry and Concrete Structural Analysis
Publication details
- Journal / source
- Materials
- Volume
- 19
- Issue
- 7
- Pages
- 1372–1372
- Publication date
- 30 March 2026
- Language
- EN