Process Optimization and Microstructure-Property Regulation of P20 Plastic Mold Steels

This study systematically investigated the effects of air-cooled pre-hardening and oil-quenched quenching-and-tempering processes on the microstructure, mechanical properties, and polishing performance of P20 plastic mold steel. Increasing the austenitizing temperature from 820 °C to 940 °C resulted in a more uniform carbide distribution, a slight improvement in hardness, and enhanced polishing performance for both processes. However, grain coarsening at 940 °C reduced the impact toughness from 157.6 J to 111.7 J. After tempering at 650 °C, both processes yielded a tempered sorbite microstructure. However, in the air-cooled samples, the carbides were aligned along the bainite lath direction, whereas in the oil-quenched samples, they exhibited an equiaxed, non-directional distribution owing to the complete recovery of the matrix. Austenitizing at 940 °C followed by air cooling and tempering at 550 °C provides the optimal balance of hardness, toughness, and polishing performance. Mitigating elemental segregation and narrowing the segregation bands represent key strategies for further enhancing polishing performance.