Investigation of Hybrid SMC–Laminated Magnetic Core Structures in Tubular Flux-Switching Permanent Magnet Linear Machines

Read full text Summarise with VIRAT
Authors: Seung Ahn Chae, Dae Yong Um, Gwan Soo Park
Cited by: 0
References: 27

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Tubular flux-switching permanent-magnet linear machines (TFSPMLMs) are difficult to optimize using a single core material because conventional axial laminations suffer from severe in-plane eddy-current loss, whereas soft magnetic composites (SMCs) exhibit lower permeability and higher hysteresis loss. To address this trade-off, three hybrid SMC–laminated steel core configurations were investigated: H1, with radially laminated steel in the yoke; H2, with axially laminated steel in the tooth; and H3, with circumferential laminated steel segments. A reference SMC model (R1) and the three hybrid models were comparatively evaluated using three-dimensional finite element analysis (3D FEA). H1 and H2 showed degraded performance due to an interfacial micro-gap along the main flux path and additional in-plane eddy currents in the laminated steel regions. To mitigate these limitations, circumferential segmentation was applied to the laminated steel parts. With eight segments, H2 achieved a thrust force of 278.8 N, comparable to that of R1, while reducing iron loss by 22.5%; even a two-segment structure provided noticeable improvement. Among the investigated models, H3 showed the best overall performance by avoiding a micro-gap on the main flux path, achieving 285.5 N, and 3.9% higher thrust force and 18% lower iron loss than R1. These results indicate that H3 is the most effective hybrid-core configuration for maximizing both thrust force and loss reduction, whereas segmented H2 is an attractive practical option when manufacturability and low-loss operation are considered.

Fields of Study & Subjects

Electric Motor Design and Analysis Magnetic Properties and Applications Magnetic Properties of Alloys

Publication details

Journal / source
Machines
Volume
14
Issue
4
Pages
381–381
Publication date
30 March 2026
Language
EN