Influence of Process Parameters on Geometry and Thermal Behavior in Wire Laser Cladding of Bronze on Stainless Steel Substrates

Wire laser cladding (WLC) of bronze on stainless steel offers a promising approach for combining the structural strength of steel with the superior tribological and corrosion properties of copper alloys. In this study, the influence of key process parameters, including wire preheating current, deposition speed, laser power, and wire feed speed on melt pool temperature and clad geometry was investigated using response surface methodology (RSM). Experiments were performed using a robot-assisted coaxial wire feeding laser cladding system, and real-time thermal monitoring was conducted using an infrared camera. The results showed that defect-free bronze clads with good metallurgical bonding and limited dilution were achieved across the investigated parameter range. Statistical analysis revealed that melt pool temperature is primarily governed by laser power and deposition speed, with a significant interaction between these parameters. Clad height was mainly influenced by wire feed speed and deposition speed, whereas clad width was controlled by laser power and deposition speed. The side angle was affected by deposition speed, laser power, and wire feed speed, reflecting the balance between vertical buildup and lateral spreading. Overall, the study demonstrates that stable and high-quality clads can be achieved by properly balancing energy input and material supply. The developed models provide valuable insight for optimizing process parameters in wire laser cladding of bronze on stainless steel.