Comparative Analysis of Tire Dynamic Load and Ride Comfort of a Hydrogen-Powered Heavy-Duty Truck Under Non-Stationary Road Excitations

To address the coupled challenges of tire dynamic load regulation and ride comfort improvement in hydrogen-powered heavy-duty trucks (HPHDTs) under non-stationary road excitations, this study evaluates a magnetorheological (MR) damper-based semi-active front suspension system. A vehicle–road coupled dynamic simulation model was developed in MATLAB/Simulink (R2025b) using a Class C road profile, and three representative driving conditions, namely acceleration, deceleration, and constant-speed driving, were considered. Four control strategies, namely, interval type-2 (IT2) fuzzy control, type-1 (T1) fuzzy control, skyhook control, and PID control, were comparatively investigated. The results indicate that deceleration is the most critical operating condition, resulting in more severe tire–road interactions and poorer ride comfort than the other scenarios. Among the evaluated strategies, IT2 fuzzy control provides the best overall performance. Compared with the passive suspension, it reduces the front-wheel RMS dynamic load by 63.39% and improves ride comfort by 64.67% under deceleration. The T1 fuzzy and PID controllers provide moderate improvements, whereas skyhook control exhibits relatively limited effectiveness. These findings demonstrate that combining MR dampers with IT2 fuzzy control provides a feasible and robust approach for improving road friendliness, ride quality, and operational stability in advanced heavy-duty vehicle suspension design.