Preparation of V-Al-Mo-Fe Intermediate Alloys by Controlled Aluminothermic Method

Vanadium (V), molybdenum (Mo), iron (Fe), and aluminum (Al) are crucial alloying elements in certain high-performance titanium alloys. Traditionally, these elements are added to titanium alloys in the form of binary master alloys such as V-Al, Mo-Al, and Ti-Fe. The preparation and use of multiple master alloys complicates titanium alloy production and increases cost. It is therefore desirable to introduce a single multi-component master alloy containing several alloying elements into the titanium alloy smelting process. This study proposes an aluminothermic co-reduction process for V2O5 and MoO3 to form a V-Al-Mo-Fe alloy with Al and Fe. Thermodynamic analysis indicates that the reduction of MoO3 by aluminum takes precedence over that of Fe2O3 and V2O5. Utilizing metallic iron as the iron source can effectively control the heat release of the system and reduce aluminum consumption. The formation of an Al-Fe alloy prior to the aluminothermic reactions decreases the reducibility of Al. Experiments confirmed that a specific Al/O ratio in the starting materials is necessary to complete the aluminothermic reduction of V2O5 and MoO3. The results show that the recovery rates of V, Mo, and Fe are strongly influenced by the Al/O ratio. When the Al/O ratio exceeds 1.6, recovery rates over 99% can be achieved for all alloying elements, with complete reduction of vanadium oxide and clear slag–alloy separation. This research provides a fundamental basis for preparing V-Al-Mo-Fe multi-component master alloys, demonstrating significant potential for applying the aluminothermic process to the preparation of other alloys.