Microstructure and Mechanical Properties of Al-Mg-Zn-Er-Zr Alloy via Multi-Pass Metal Inert Gas (MIG) Welding

The microstructure and mechanical properties of the joint of a novel Al-Mg-Zn-Er-Zr alloy fabricated by multi-pass MIG welding using ER5E61 filler wire were investigated first. The results show that multi-pass MIG welding induces heterogeneous grains in the weld metal: equiaxed grains, columnar grains, and cover-pass feather-like grains. The weld metal exhibits coarse grains (45.81 ± 19.68 μm), a high proportion of high-angle grain boundaries (83.3%), and a low dislocation density compared with the base metal. The joint achieves 316 MPa ultimate tensile strength, 10.5% elongation, and 0.80 joint efficiency with minimum hardness (77.2 HV) in the weld metal. Strengthening mechanism analysis reveals that joint softening mainly stems from the disappearance of deformed structure, reduced dislocation density, and the coarsening and reduction in Al3(Er, Zr) nanophases. Diffuse precipitation of the Al3(Er, Zr) nanophases (19.61 nm, 0.53%) under multi-pass MIG welding compensates for the softening of the welded joint, leading to the retention of high tensile strength despite marked hardness loss, thus demonstrating effective strength preservation.