Influence of the Final Annealing Temperature on Al-Fe-Si Alloy Foil Microstructure and Properties

Read full text Summarise with VIRAT
Authors: Xiuda Zhu, Changle Xiao, Xiu‐Bin Wang, Xiaohu Chen, Hongyan Wu, Wei Chen
Cited by: 0
References: 16

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This study systematically investigates the effects of the final annealing temperature on the microstructural evolution and mechanical properties of an Al-Fe-Si alloy aluminum foil. Scanning electron microscopy (SEM) characterization and tensile tests are employed for analysis. As the annealing temperature is elevated from 240 °C to 360 °C, the average grain size increases monotonically from 5.2 μm to 9.6 μm. Continuous recrystallization is identified as the predominant grain growth mechanism. Tensile deformation exhibits the homogeneous plastic behavior without localized necking. The tensile strength decreases significantly in the range of 240–300 °C and subsequently undergoes a recovery stage at 300–360 °C. Significant elongation anisotropy is observed. The maximum elongation reaches 30–34% in the 45° direction, relative to the rolling direction (RD), which is approximately 1.5 times that along the RD (0°). Comparative analysis of the anisotropy indices demonstrates that the aluminum foil annealed at 240 °C achieves the minimal tensile strength anisotropy (13.0 MPa) and elongation anisotropy (−4.2%). This indicates an optimal comprehensive mechanical performance. These findings provide a theoretical rationale for the industrial optimization of the annealing processes for Al-Fe-Si alloy foils. They are particularly valuable for balancing microstructural regulation and mechanical property enhancement in lithium-ion battery soft-packaging applications.

Fields of Study & Subjects

Aluminum Alloy Microstructure Properties Metallurgy and Material Forming Microstructure and mechanical properties

Publication details

Journal / source
Metals
Volume
16
Issue
4
Pages
368–368
Publication date
27 March 2026
Language
EN