Validation of a Surface Chemical Attack Process on Precision Metal Spheres for Use in Non-Contact Metrology

Read full text Summarise with VIRAT
Authors: Eduardo Cuesta, Víctor M. Meana, Braulio José Álvarez Álvarez, Jose H. Ablanedo, Sara Giganto
Cited by: 0
References: 17

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This work aims to find a chemical process that modifies the surface finish of precision metal spheres to enable their use as reference elements in optical metrology. The chemical process should not substantially alter the original quality or dimensional accuracy, but it should give the spheres a matte finish, eliminating reflections. The spheres used are AISI 316L stainless steel bearing spheres, which are of low cost, high availability and great dimensional accuracy, making them suitable as reference elements if their high gloss is removed. Two procedures are tested in the research. On the one hand, different passivation acids are tested, and on the other, a chemical attack with a much more aggressive acid, aqua regia (hydrochloric acid, HCl, and nitric acid, HNO3, in a 1:3 ratio). Tests showed that none of the passivation methods sufficiently eliminated glare and reflections. However, chemical etching by immersion in aqua regia did produce a matte and homogeneous surface finish, reducing reflectivity and promoting the diffusion of incident light without loss of precision. The paper presents the tests to find the optimal exposure time to aqua regia as well as the influence of chemical etching from a dimensional and geometrical point of view, both in contact and laser sensor optical measurement. The research has considered a representative series of the chemical attack procedure to validate the repeatability of the method. Finally, it has been verified that the method is repeatable and that improvements (close to 45%) in the metrological accuracy of the laser sensor measurements are achieved when using spheres treated with aqua regia compared to original spheres. In conclusion, it has been demonstrated that the chemical attack with aqua regia is not only a valid method for generating matte surfaces suitable for optical metrology, but a process that can also be implemented at low cost and with high reproducibility.

Fields of Study & Subjects

Advanced Measurement and Metrology Techniques Surface Roughness and Optical Measurements Optical measurement and interference techniques

Publication details

Journal / source
Metals
Volume
16
Issue
4
Pages
381–381
Publication date
30 March 2026
Language
EN