Effect of Aluminum Carbide (Al4C3) on the Mechanical Properties of Aluminum Matrix Composites Reinforced with Graphene Nanoplatelets

Aluminum–graphene nanoplatelet (Al/GNP) composites have attracted significant attention as lightweight structural materials, yet their mechanical performance is strongly influenced by interfacial reactions and the formation of carbides. In this study, Al/GNP composites containing 0.1–1.1 wt.% graphene were produced via powder metallurgy and hot extrusion at 400 °C and 500 °C. Hot extrusion at the higher temperature enables the controlled in situ formation of aluminum carbide (Al4C3). A comprehensive microstructural characterization using SEM and HRTEM was combined with tensile testing to elucidate the influence of carbide size on mechanical behavior. Hot extrusion at 500 °C promotes the formation of uniformly distributed, nanoscale Al4C3 carbides whose size, morphology, and aspect ratio depend on graphene content. Composites containing nano-sized carbides exhibit a markedly improved strength–ductility balance compared to carbide-free counterparts, with optimal performance achieved at 0.3 and 0.7 wt.% GNPs. The enhancement is attributed to synergistic strengthening mechanisms involving improved interfacial bonding, efficient load transfer, nanoscale dispersion strengthening, and carbide–dislocation interactions. The results indicate that the controlled formation of nanoscale Al4C3 is not detrimental; rather, it contributes to the optimization of the mechanical properties of Al/GNP composites. Unlike most previous studies that treat carbide formation as a detrimental effect, this work demonstrates that its controlled nanoscale evolution can be used as a deliberate strengthening strategy through its influence on microstructural mechanisms.