Multi-Objective Optimization and Performance Evaluation of Rhombic Pin-Fin Microchannel Heat Sinks with Diverse Manifold Configurations

In response to the increasingly severe heat dissipation challenges in electronic devices, three types of manifold microchannel heat sinks (MMC) incorporating rhombic pin-fins were proposed. Under the constraint that the maximum temperature of the heat source surface remains below 343.15 K, numerical comparisons with a conventional straight rectangular microchannel heat sinks (MCHS) reveal that the design featuring a trapezoidal manifold exhibits superior comprehensive thermal performance and improved temperature uniformity. Furthermore, the influence of rhombic pin-fin geometry on thermal performance was investigated for both MCHS with and without the trapezoidal manifold under varying mass flow rates. Results show that for the MCHS without a manifold, performance evaluation criterion (PEC) reaches its maximum when the inlet angle of the rhombic pin-fin is 120°, the side length is 0.17 mm, and the pin-fin height is 0.18 mm. In contrast, for the MCHS with the trapezoidal manifold, optimal PEC is achieved at an inlet angle of 110°, a side length of 0.18 mm, and a pin-fin height of 2.2 mm. Additionally, a multi-objective optimization was conducted using the Latin hypercube sampling method. Three objective functions-maximum temperature (Tmax), thermal performance (PEC), and temperature uniformity (σT)-were considered. A total of 150 sample points were used to train Kriging surrogate models for the rhombic pin-fin MCHS with trapezoidal manifold. The optimization results demonstrate a 34.05% enhancement in thermal performance and an 18.6% improvement in temperature uniformity.