Experimental Stress Analysis of Mast–Counterweight Connection in a Modified Bucket-Wheel Excavator ERc 1400-30/7 Using Strain-Gauge Measurements

Background: Bucket-wheel excavators are critical assets in surface mining operations, where structural modifications to increase productivity must be validated through rigorous stress analysis to ensure operational safety. Following modification of an ERc 1400-30/7 excavator’s bucket wheel from 18 to 20 buckets, increased operational loads necessitated experimental verification of structural integrity. Methods: A custom 10-channel strain-gauge data acquisition system with 0–10 kHz bandwidth measured stresses in cable anchoring lugs and H-type diagonal members under operational conditions at the Jilț lignite mine, Romania. Measurements were performed during both left and right bucket-wheel rotation. Finite element analysis validated experimental results. Results: Maximum equivalent stresses of 210.0 MPa and 167.1 MPa were measured in the left and right anchoring lugs, respectively, during left bucket-wheel rotation, representing 59% and 47% of material yield strength with safety factors of 1.69 and 2.12. Significant load asymmetry was observed, with left rotation inducing 220–284% higher stresses than right rotation. FEA validation showed