Screening and Evaluation of Anti-Salt Surfactant/Polymer System for Enhanced Oil Recovery in a Low-Permeability Reservoir in Changqing Oilfield, China

A low-permeability, high salinity reservoir entered the high-water-cut and high recovery degree stage in the middle and late stages of development, and it is difficult to tap the potential of water flooding. The overall water flooding recovery of the developed low-permeability reservoir is low, and the produced water has high oil content, many granular impurities, and high inorganic salt content. The polymer–surfactant binary system was studied according to the reservoir conditions. The polymer acrylic acid/polyacrylamide/2-acryloylamino-2-methyl-1-propanesulfonic acid was selected by viscosity measurement. The viscosity stability of the polymer and the effect of the flooding system were evaluated, and the salt-tolerant surfactant sulfonated betaine + amides and coco composite system were screened, and the viscosity, interfacial tension, and displacement effect were evaluated. Finally, the polymer–surfactant binary flooding system was formed. The system has good compatibility, the interfacial tension can still be reduced to 10−3 mN/m at 40 °C and 23,800 mg/L, and the viscosity of the polymer solution increased by 5.8% upon addition of the surfactant. The composite system can improve the oil displacement efficiency by 21.19%. The results of a parallel core displacement experiment with a 3.91 permeability ratio show that the oil displacement efficiency can be improved by 19.96%. The system has good performance in low-permeability oilfields and can effectively displace crude oil, which is of great significance for the displacement of low-permeability heterogeneous reservoirs.